Shack at 02/05/14

Shack at 02/05/14

Thursday, 26 January 2012

Been messing about with various modes and antennas today. Noticed yesterday that the 3o metre band was the most active overall, re weak signal modes, so today I resolved to get something working antenna wise so I could grab some action.

I had managed to tune the Pro Whip on 3o, but wiped out my freeview signal in the process. I also tried a long wire, but that had the same effect. The 80 metre 1/4 wave magmount on the metal roof had no effect on the tv however, so 'Thinks!' I have various mobile whips in the shed, but infortunately not one for 30. Could I rig something up with them?. After returning from town and grabbing an 'Ocean Pie' for lunch, I reasoned that joining the base (helical) sections of a ten and twenty whip together, with the standard whip on top, I might get close enough to 10 megs to try inserting another coil section that would take care of the other missing whip section. Sounded logical, even if electically it's not the done thing.

Anyway, I joined said sections together and fitted the base to a tri magmount on the metal roof. To my surprise, after connection the MFJ analyzer, the swr was 2.1. Amazing!, and I hadn't even compensated for the missing whip section yet. Well!, if it's happy as it is so be it. Sometimes antennas just defy logic Hi!.

I replace the 80 whip with this new one and went back in to the shack. On connecting the analyser now however the swr was well out. In fact the antenna now resonated on 7 megs instead on 10. All through basically changing to a longer lengthg of coax feeder. That's silly, it shouldn't be anywhere near 40 metres. Oh well, I thought, in for a penny. I connected the feeder to the atu, tuned the radio to a quiet spot on 30 metres and fired 5 watts into it anyway. A bit of twiddling of the inductance, tx'er and antenna controls and I easily had the swr down to 1.1 and an apparent power out of five watts. The ft-897 was set at 5 watts (the minimum) in the menu.

As I have since been received in Moscow and Germany, I suppose there can't be a lot wrong with my signal. Also I'm not freezing my Freeview signal at all, so I think I'll leave it at that for the time being.

As I'm now on qrv on 30 hf I can't play with jt65 as there is no allocated frequency for it. However, there is one for ROS, so I might have a go at that tomorrow.

Tuesday, 24 January 2012

How's that for a bit of colour Hi!. Red=qso in progress. Mauve=station calling cq and yellow=my qso with F5RRS. You'll notice I had to send his report twice befor receiving RRR from him. Obviously my sig to him dropped at the critical time.
Got to thinking last night, wonder if I could get something going on 80 metres when 40 goes quiet.

Got a ten metre mag mount on a metal roof used for 10 fm. Don't use it lately, so how about swapping it for an 80 metre antenna?. Could try some jt65-hf and Opera this evening then.

This afternoon I put the 80 metre ant and a spare tri-magmount on the letal roof and used the analyzer to tune it. After I was satisfied with the swr I replaced the 10 metre ant with the 80. All I had to do then was move the feeder from the 10 metre rig to the 897, via an atu. Then I waited 'til dark.

First I tried Opera, which eventually saw me log France and Netherlands, both ways.

Noticing a jt65 trace on the upper end of the waterfall, I switched to that mode and answered F4EFL who gave me -12. The jt65 frequency is 3.576 and the Opera 3.575, which is very handy as I don't even have to retune the antenna. Looks like 80 is where I will park every evening now. Sorted!.
Looks like we're in business.

Radio User is out today, so I'll be picking that up later. Raining at the moment, but at least the wind has dropped. Try out my new wiper blades Hi!. Had to replace a couple the other day.

Noticed yesterday, that although the Whip tunes 30 metres to allow use of Opera mode, my freeview signal get's knocked out. TV antenna is only about 15 feet away from whip. However, the Arno Cobra is even closer, with all it's feeder radiation too and there's no tvi from that.

Might have to concentrate of wspr/jt65-hf on the Arno until a frequency on 40 is allocated to Opera. Shouldn't be long I reckon.

HA2RI sstv is comong in strong at the moment. That's on the whip of course. The Garex active job and a long wire cannot compete unfortunately.
Up at 07:00, shack alive and tx'ing some jt65-hf on 40. However, at 07:40 not a nibble so have now switched to wspr, see how that does for a bit.

Monday, 23 January 2012

All gone quiet over there Hi!.

Had a decent day playing with Opera, but all quiet now. Hope a 40 metre frequency is allocated soon then I can use the whip for sstv again.

Gone back to jt65-hf on 40 at the moment using the Arno Cobra again, but no response to my cq'ing. Shame I don't have an antenna for 80 as I expect I could get more response from Opera down there at this time onward. Never mind, can't win 'em all.

Took down the horizontal dipole for 11 as it wasn't getting any use anyway, so to give me another string to the bow I made use of the feeder by putting up an hb9cv for 2 metres I had in the shed (horizontal). Don't have a rotator so fixed it facing East. Never know, if conditions are up and guys start squirting Opera my way from Europe I might be in with a chance. Could also use jt65 or wspr of course.
Here is a link to the O-P-E-R-A software download page

http://rosmodem.wordpress.com/

And here is a link to a handy operating guide by Andy K3UK, as there is no official guide by EA5HVK realeased as yet.

http://www.obriensweb.com/operaguide.html

And a shot of pskreporter showing spots of my station by others (minutes ago) and stations reported by me (small balloons) included in the last 2 hour slot. I think I've got that the right way round by studying my log on Pskreporter.

Morning all!

Just discovered a new mode by EA5HVK, a bit on the lines of wspr last night. Managed to tune the whip to 10.135 usb and fired the program up this morning. Sends beacons at pretedermined intervals, as does wspr, but the spots by other stations are sent back to the sender via the internet. Here is a screen shot of my first attempt On the right side is the reporters screen, where you can see my station having been received by the Netherlands amongst others (In Red). Also on the right is a report from me of the station I had received on the left screen. This one is blue.

Sunday, 22 January 2012

All change again Hi!. SSTV pics are nowhere near as clear using alternative antennas to the whip, so I've reverted to the original set up. The whip is back to sstv and the weak signal modes are back to the Arno Cobra. The latter does work as long as I keep the power restricted to 5 watts, which I guess is quite adequate for wspr and jt65-hf. The states has heard me on wspr and a JT65-HF qso has been made into Germany so far, so should be ok.

And now for some lunch while I leave wspr running for a while
Just been playing about with the whip antenna. Although the analyzer says the swr is respectable on all bands except the warc bands, in actual use I can't get any apart from 20 and 40 metres to tune up. Also, upping to ten watts on 20 seems to make the power needle on the Kenwood AT-200 atu fluctuate occasionally, though I did get W4MPS answer me at 12:26. Bet the Italian guys are putting out a bit more than that Hi!

I think I'll play safe and leave the power at 5 watts on both bands whether using jt65-hf or wspr. Don't want to risk a dirty signal going out.

Saturday, 21 January 2012



Here's a couple of screen shots since using the whip for wspr on 40 metres, 5 watts .
As a matter of interest I just put the analyzer on the Pro Whip and discovered something very interesting. It actually tunes on all the bands from 3.8 to 144 mhz. Amazing, and I didn't think of analysing it in the couple of years I've had it *sigh*. Before I got back into tx'ing the whip was basically used for receiving sstv on 20 metres and broadcast band listening.

Now I find I don't have to use the Arno Cobra after all, with all it's radiating feeder problems Hi!. All data can be handled on whatever band I fancy using the whip. Brilliant!.

Only problem is sstv is going to have to rely on the garex active antenna, which is not up to the whip's performance. Seeing a picture just arrived on it though, I reckon I can live with that.
After a few days of data I've discovered what I can and can't do re data. It would appear that the E-Ham reviews on the EH Arno Cobra are correct, insofar as rf radiating from the feeder is conscerned. If I try upping the power out from 5 watts, I end up with a distorted signal. However, as 5 watts is about the going rate for wspr I don't suppose that's too much of a problem.

I have made made a few contacts on 40 using jt65-hf with the 5 watts and Arno ant, but as 20 metres is much more lively with this mode I migrate there during the daylight hours and turn the power up to a respectable 10 watts. The Pro Whip has no problem with that, and 10 is about right for that mode I think.

Friday, 20 January 2012

Been trying out a bit of JT65-HF this afternoon. So far worked a couple of G's on 40 and a German station using the Pro Whip on 20 metres (All on 5 watts).

15:05 Back to WSPR while I get some tea and bics.

Wednesday, 18 January 2012

'Morning all. Not a bad start this morning, 4 traces and 9 stations receiving me so far. Not bothering with town today, nice lazy day in the shack.

Although I can't run any other radio gear on this computer whilst wspr'ing, I can run SBS1 and Virtual Radar server. So that looks like the set up for the forseable future. Data on 40 metres and virtual plane spotting. Well I say virtual, I can always pop outside after getting the heads up and point some 36x70's at the passing trade. Usually at about 18.000 ft by the time Gatwick depatures reach overhead my loctation. Bins actually go up to 60x but I can't hold them steady enough at that power Hi!

Tuesday, 17 January 2012



Phew!, did I mention brain damage.

Spent about five hours this afternoon getting wspr up and running. As you can see from the pic above, I finally made it. I've filtered the stations to show only the ones receiving me, which covers the last 4 hours since going live.

I started out trying to get the Signalink interface working, but gave up after a couple of hours. All I could transmit was a horrible noise, try as I might to get levels right. I'm pretty sure the built in sound card has gone toes up, and now I think of it this might be the breason I gave up data a while back.

I then dug out my RigBlaster Pro from the 'junk box'. This needed a bank of jump leads, 5 audio cables, a serial cable and mic input cable sorted out. To cut a long story short I managed to get the radio, computer and interface on speaking terms and proceeded to decorate 40 metres with 5 watts of wspr. As the map confirms I am in business, so chuffed to be back o the air after so long in listening mode.

Unlike the Signalink (USB) the RigBlaster uses the serial port on the desk top computer and the program uses the sound card, so the PCR-1000 is off limits whilst I play data.

SSTV is fed to a notebook from the Satellit 750

Top is a a screen shot of all stations active on 40 metres over the last 3 hours

Monday, 16 January 2012

All change again Hi!.

Been monitoring a bit of JT65-HF and WSPR after the episode with the cameras. After visiting another ham's site and seeing that he had his wspr set up using an ft-897 and signalink interface, it suddenly dawned on me that when I bought my own signalink I also got the data lead suitable for my own ft-897. Therefore I had no excuse but to give it another whirl. I wouldn't have to configure all the jump leads in the Rigblaster after all, so no brain damage there then.

This evening I set up the rig and interface and using the Pro Whip to receive, I have sigs on the wspr waterfall. I don't want to use the whip to transmit eg on 20 metres as it would screw up my sstv reception, which is now switched to the Satellit 750 incidentally. Never the same set up five minutes here Hi!.

I have an Arno Cobra antenna designed especially for 40 metres, so that's the band I will conentrate on re wspr. So that's tomorrows activity sorted. Put the antenna up and try squirting some wpsr into it. Being a weak signal mode It's concidered bad form to exceed 5 watts, so I'll be sticking to that.

22:05 Calling it a day radio wise I think. Bit of Clint Eastwood (Unforgiven Western) while I sup some tea, then it's the land of nod. Night all!.
Well after a morning's work this what I ended up with.

I started out fitting a wireless camera looking at the front door, which was about 20 feet away from the receiver. Had to cut the power lead to extend it of course. Waste of time!. Couldn't even get a picture. Moving the camera closer, ie half that distance, I did get a picture but only after positioning by trial and error.

Next I tried in the car port, Only when the camera was about six or seven feet in a straight line from the receiver, did I get a picture. However, it was not good insofar as there were noise bars floating across the screen.

Decided to call it a day with wireless jobs and dug out my original wired camera again. It produced a lousy picture when last aired, but I took it apart and cleaned the lens and inside the glass. It had been outside in all weathers for years after all. I now hooked this up to my little five inch tv, as shown in the pic above. The over exposed look is due to the camera I took the pic with. In reality the image is ok, and should be ideal at night with it's infra red capability.

On a different note, I hear one of the Alpha Uniform club members has had his collar felt, resulting in his radio being confiscated. That's Mick permanently out of the 'Freenband' scene apparently.

It's a risk one takes, being basically a pirate I guess. Maybe, If Mick is really bitten by the radio bug, He'll not give up and will decide to go legit as it were by sitting the necessary exams. Worth it for peace of mind at least, if your reading this mate.

Sunday, 15 January 2012


Another quiet day for me. Got a replacement wireless camera for the car port in town today, so tomorrow I'm fixing that up to go with it's mate that overlooks the front door so I can either choose which to show on the tv when it's not used for it's primary role, or have them automatically switch between the two. I say wireless, which is true as regards the actual camera picture. The camera still need 12 volts fed to it, which tend to negate the 'wireless' descriptionHi!. The camera viewing the path to the front door, which is hard wired, is now switched to a 5 inch portable tv. Will include a pic when I've got it all set up.

The power lead supplied for the camera is only a couple of metres, so will have to splice a section in there. Bang goes the guarentee, so hope the thing lasts longer than most of the electronic gadgets I buy.

Haven't really been in a radio mood today, so concentrated on my latest aircraft mag (Airliner World) and monitoring Virtual Radar. Quite unusual to get anything on screen coming in to Southampton, so here's a screen shot taken at 18:51 of a Air Hamburg Citation on finals. Tracked it down to 75 feet.